Setra-system SRCM Manual de usuario descargar pdf (Pagina 29)

The SRCM has a USB port built in for the purpose of duplicating congurations

when multiple units are being setup with similar congurations. To use this func-

tion, a USB 2.0 thumb drive of capacity 256 megabytes or larger must be used.

The thumb drive must have at least 100K or free memory available. The USB port

should only be accessed by qualied personnel.

Setra recommends the Kingston DataTraveler 112, 4GB (minimum) ash drive

along with the aid of a short mini-USB adapter cable from Tensility International

Corporation, P/N 10-00003. No PC is required.

Manufacturer Model Size (GB) Comment

Kingston DataTraveler 1 No issue

256 MB No issue

DataTraveler 4 To make Kingston work,

format as:

• Fat 32

• Must have volume label

• Do not use quick format

DataTraveler 8

DataTraveler

112

4 Passes out of the box with-

out formatting

Sandisk Cruzer 2 To make Sandisk work,

format as:

• Fat 32

• Must have volume label

• Do not use quick format

To access the USB port, rst remove the faceplate cover and set it aside. The USB

port is located on the right side of the touch-screen display driver board, and is ac-

cessed by removing the security screw and ipping up the display housing. A mini-

USB 5-pin Male to USB A Female cable (from Tensility International Corporation,

P/N 10-00003) is required to connect a standard USB 2.0 compliant thumb-drive to

the SRCM USB port.

To make use of the cloning feature, rst setup one SRCM with a conguration that

represents most other SRCM units that will be used during installation. Congure

the “master” unit with all parameters needed, including alarm thresholds, condition

banners, blinking operations, I/O conguration and so on. Make sure the Save &

Exit function is used to properly save your conguration. This “master” setup will

then be downloaded to the thumb drive and for use uploading to other units.

USB Conguration

Cloning

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 42 43

Sin comentarios

Setra-system SRCM Manual de usuario Pagina 29